by Liam23Mil0 | Jul 24, 2022
Epiphone Les Paul (broken headstock) Before After This is an example of a repair to a broken headstock which is fairly common on Epiphone guitars. Re-gluing the headstock properly is very important and must be done right on the first attempt or it could be messed up...
by Liam23Mil0 | Jul 24, 2022
1960 Les Paul Jr. Refinish Before After This guitar had a broken headstock (completely off guitar neck) and the finish was in poor condition. The headstock was re-glued to the neck and a complete refinishing of the guitar was done (Heritage cherry). The guitar...
by Liam23Mil0 | Jul 24, 2022
Damaged Finish Repair Before After A hole was accidently drilled through the back of this guitar while drilling a hole for a wiring channel. The damage had to be repaired through a multi step process of filling the hole, fixing the finish and refinishing the area back...
by Liam23Mil0 | Jul 24, 2022
Headstock Repair Before After This is an example of a repair done on a broken vintage Gibson headstock. The entire headstock had to be re-enforced and then refinished. New decals were applied to the headstock face while the serial # on the back of the headstock had to...
by Liam23Mil0 | Jul 24, 2022
Gibson ES 175D (Severe Damage) – Restoration Before During After This vintage Gibson ES175D sustained severe damage to the back of the guitar. Bracing on the inside had to be repaired as well as support patches to hold the back of the guitar in place so that...
